ul. Firmowa 30, 05-152 Cząstków Polski
email: parker@parker.com.pl
Tel: +48 22 785 11 11
fax +48 22 785 09 99
Product categories:
- Engines
- Electric trolling motors
- Equipment and fittings for boats
- Navigation equipment
- Boats
- Parker Ribs
- Inflatable Boats
- Hovercrafts
- Morskie kaski ochronne GECKO
- JASON’S CRADLE
Our brands:
Certificates
RODO:
Simrad RPU160
Hydraulic Steering Rams 160-550 cc capacity. Typically fitted up to 50ft.
Hydraulic steering systems are now being used in every
category of small vessel. In many respects hydraulic steering is
preferable to mechanical steering. Hydraulic systems normally comprise
of two main components, a steering wheel pump and steering cylinder(s).
The steering wheel pump may be either a gear pump or a plunger pump.
Which ever type is installed, steering is achieved by turning the
steering wheel in either direction causing oil from the wheel pump to be
supplied to the appropriate side of the cylinder. Oil is returned via
the opposite side of the cylinder back to the pump.
The linear
motion of the cylinder rod is transformed to a rotary motion by the
tiller, which turns the rudder shaft and rudder. Check valves
(non-return valves) are usually incorporated to prevent the rudder
driving the steering wheel pump. If an autopilot is to be included in
such a hydraulic steering system, then the oil flow providing the rudder
movement must be controlled by electrical signals from the autopilot.
The maximum flow rate of RPU80, RPU160 and RPU300 is 0,8 l/min., 1,6
l/min. and 3,0 l/min. respectively, measured at a pressure of 10 bar
with nominal voltage (12 VDC) on the motor terminals.
Hydraulic Steering Rams 160-550 cc capacity. Typically fitted up to 50ft.
AUTOPILOT / AUTOSTEERING
Max Boat Length | 35-50ft m |
Max Pressure | 60 bars |
POWER
Power Supply | 12V - (3-10A) vDC |